China wholesale 500t H Type Double Point Press Machine - C Frame Single Crank Servo Press Machine(STA-Series) – Daya
China wholesale 500t H Type Double Point Press Machine - C Frame Single Crank Servo Press Machine(STA-Series) – Daya Detail:
Main performance characteristics:
Main performance characteristics I:
1. ® High strength body structure, small deformation and high precision
2. ® The sliding block adopts double angle hexahedral guide rail, and the sliding block guide rail adopts “high-frequency quenching” and “rail grinding process”: low wear, high precision, long precision holding time, and improves the service life of the mold.
3. ® The crankshaft is made of high-strength alloy material 42CrMo. Its strength is 1.3 times that of 45 steel and its service life is longer.
4. ® The copper sleeve is made of tin phosphor bronze ZQSn10-1, and its strength is 1.5 times that of ordinary BC6 brass.
5. ® The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punch and die.
6. ® Standard Japanese SMC pressure regulating valve, lubricator, air filter.
7. ® The standard configuration is high-precision bearing and Japanese NOK seal.
8. ® 15.6 inch touch screen
9. ® Optional mold pad (air cushion).
Main performance characteristics II:
1. ® 9 processing modes are built-in, and each product can select the processing curve most suitable for component processing,So as to achieve high precision, high efficiency and high energy conservation.
2. ® Compared with traditional presses, it has simple structure, high mechanical transmission efficiency and low maintenance cost.
3. ® According to the characteristics of products/materials, the stamping forming speed can be reduced during the material processing to achieve the best forming speed of products/materials. Thus reducing vibration and stamping noise; Improve product accuracy and extend the service life of the mold.
4. ® According to different products, different heights are required. The stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves the efficiency.
Standard configuration
1 |
Hydraulic overload protection device |
9 |
Air blowing device |
2 |
Servo motor(Adjustable speed) |
10 |
Independent control cabinet |
3 |
Digital die height indicator |
11 |
Mis-delivery detection device reserved interface |
4 |
Slider and mold balance device |
12 |
Photoelectric safety protection device |
5 |
Electronic cam switch device |
13 |
Oil-gathering silencer |
6 |
Prejudging counter |
14 |
Electric grease lubrication device |
7 |
Air source connector |
15 |
Touch (pre-break, prejudge, total count) |
8 |
Second falling protection device |
16 |
Air cooled chiller |
Optional Configuration
1 |
Pneumatic mold pad device |
5 |
Feeder (air, mechanical and NC) |
2 |
Thin oil lubrication device |
6 |
Leveling machine |
3 |
Quick die change device (Die lifter, die clamper or die mover) |
7 |
Rack |
4 |
Upper part hit material device of slider |
8 |
Manipulator |
Technical parameter
Name | Unit | STA-80sv | STA-110sv | STA-160sv | STA-200sv | STA-260sv | STA-315sv | |
Press capacity | Ton | 80 | 110 | 160 | 200 | 260 | 315 | |
Impulse position | mm | 3.5 | 4 | 4.5 | 5 | 5.5 | 6 | |
Slider stroke length | Swing mode | mm | 50/90/120 | 60/100/130 | 70/110/160 | 70/110/160 | 110/160/200 | 110/160/200 |
Full stroke | mm | 150 | 180 | 200 | 200 | 250 | 250 | |
Slider zero load(SPM) | Comesponding swing mode | S.P.M | 120/90/80 | 100/80/70 | 95/75/60 | 95/75/60 | 70/60/50 | 65/55/45 |
Full stroke comesponding swing | S.P.M | ~70 | ~60 | ~50 | ~50 | ~40 | ~40 | |
Max mold height | mm | 340 | 360 | 460 | 460 | 500 | 520 | |
Slider adjustment amount | mm | 80 | 80 | 100 | 110 | 120 | 120 | |
Up platform size | mm | 770*420*70 | 910*470*80 | 990*550*90 | 1130*630*90 | 1250*700*100 | 1300*750*100 | |
Down platform size | mm | 1000*550*90 | 1150*600*110 | 1250*800*140 | 1400*820*160 | 1500*840*180 | 1600*840*180 | |
Slider center to machine distance | mm | 280 | 305 | 405 | 415 | 430 | 430 | |
Servo motor torque | Nm | 3700 | 4500 | 7500 | 10000 | 15000 | 20000 | |
Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 | 6 | |
Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 |
Product detail pictures:
Related Product Guide:
To get the stage of realizing dreams of our employees! To build a happier, more united and much more skilled crew! To reach a mutual benefit of our prospects, suppliers, the society and ourselves for China wholesale 500t H Type Double Point Press Machine - C Frame Single Crank Servo Press Machine(STA-Series) – Daya , The product will supply to all over the world, such as: Jordan, Bangalore, South Africa, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
By Janet from Danish - 2017.09.16 13:44
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By mary rash from Venezuela - 2017.10.25 15:53