Discountable price 200t Solid Frame Single Point Mechanical Press Machine - C Frame High Speed Press – Daya
Discountable price 200t Solid Frame Single Point Mechanical Press Machine - C Frame High Speed Press – Daya Detail:
Performance characteristics
1. The frame is made of high-strength cast iron. After internal stress relief, the material is stable and the precision remains unchanged, which is most suitable for continuous stamping production;
2. Double guide rail, one center pillar structure, using zero error ball bearing to replace the traditional sliding plate structure, so as to reduce the dynamic friction to the minimum, and cooperate with forced lubrication to minimize the thermal deformation and achieve the highest accuracy;
3. The reverse side dynamic balance device is optional to reduce vibration, so that the press has the best accuracy and stability;
4. Manual mold adjustment, with mold height display and oil pressure locking device, is convenient for mold adjustment operation;
5. Man machine interface microcomputer control, numerical fault monitoring system screen display, easy to operate;
Technical parameter | ||||||||||||||||
Name | Specifications | C-25T | C-45T | ST-65T | C-85T | |||||||||||
Press capacity | Ton | 25 | 45 | 65 | 85 | |||||||||||
Slider stroke length | mm | 20 | 25 | 30 | 25 | 30 | 40 | 25 | 30 | 40 | 50 | 20 | 30 | 40 | 50 | 60 |
Slider strokes per minute | S.P.M | 200-1000 | 200-900 | 200-800 | 200-800 | 200-700 | 200-600 | 200-800 | 200-700 | 200-600 | 200-500 | 200-600 | 200-500 | 200-400 | 200-300 | 200-300 |
Die height | mm | 185-215 | 183-313 | 180-210 | 213-243 | 210-240 | 205-235 | 209-259 | 206-256 | 200-250 | 196-246 | 320-370 | 315-365 | 310-360 | 305-355 | 300-350 |
Slider adjustment amount | mm | 30 | 30 | 50 | 50 | |||||||||||
Bolster size | mm | 600*300*80 | 680*420 | 890*520*130 | 1000*600*140 | |||||||||||
Slider size | mm | 330*225 | 420*320 | 540*340 | 700*450 | |||||||||||
Blank-holding hole | mm | 100*300(400) | 100*400(500) | 120*460(660) | 170*460(700) | |||||||||||
Main motor | HP | 5 | 7.5 | 15 | 30 | |||||||||||
Press weight | Kg | 2919 | 5080 | 8016 | 14500 | |||||||||||
Circulatory system | / | Forceful automation | ||||||||||||||
Speed control system | / | Lnverter | ||||||||||||||
Clutch &Brake | / | Air & Friction | ||||||||||||||
Auto top stop | / | Standard | ||||||||||||||
Vibration System | / | (Mounting or pnenmatic Mounting ) or (Option) | ||||||||||||||
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. |
Advantages
Slide guide
Advantage 1: The slide rail adopts “high frequency quenching” and “rail grinding process”:
High frequency quenching: the hardness reaches above hrc48,
Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.
Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.
Worm gear
Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)
Compared with the ball seat of nodular cast iron used by general factories
Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life
Ball socket
Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.
Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged
Copper sleeve
Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers
Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time
Thimble
Advantage 5: Sleeve ring, ring in contact with oil seal, ring “surface grinding” + “surface chromium plating (CR)” process
Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)
Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer
Crankshaft
Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel
Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.
Tubing
Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8
Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth
Gear & drive shaft
Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear
Product detail pictures:
Related Product Guide:
We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Discountable price 200t Solid Frame Single Point Mechanical Press Machine - C Frame High Speed Press – Daya , The product will supply to all over the world, such as: Czech Republic, Toronto, Israel, Due to our good goods and services, we've received good reputation and credibility from local and international customers. If you will need more information and are interested in any of our solutions, be sure to feel free to contact us. We look forward to becoming your supplier in the near future.
By Marcia from Singapore - 2017.01.28 19:59
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Daniel Coppin from Australia - 2018.02.12 14:52