High definition Kiston Press Machine - STX series C Frame Single Crank Mechanical Press – Daya

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Water Cooling, 45t Deep Throat Punch Machine, 500t Hot Die Forging Press Machine, We welcome buyers all around the word to call us for long term company associations. Our items are the most effective. Once Selected, Ideal Forever!
High definition Kiston Press Machine - STX series C Frame Single Crank Mechanical Press – Daya Detail:

Main performance characteristics:

Body rigidity (deformation) 1/6000.

Use pneumatic wet clutch brake, environmental protection, no pollution, low noise, long service life.

The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency hardening” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life.

The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.

The copper sleeve is made of tin-phosphorus bronze ZQSn10-1, whose strength is 1.5 times higher than that of ordinary BC6 brass.

The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punch and die.

Standard Japanese SMC pressure regulating valve, lubricator, air filter.

Standard Japanese NSK bearings and Japanese NOK seals.

Standard configuration of German Siemens PLC, Siemens touch screen, Siemens motor,

Optional mold cushion (air cushion).

Standard configuration

stx0

Standard configuration

Hydraulic overload protection device
Manual slider adjustment device (below ST60)
Electric slider adjusting device (above ST80)
Variable frequency variable speed motor (adjustable speed)
Mechanical mold height indicator (below ST60)
Digital mold height indicator (above ST80)
Slider and mold balance device
Rotating cam controller
Crankshaft angle indicator
Electromagnetic counter
Air source connector
Two-degree fall protection device
Air blowing device
Mechanical shockproof feet
Reserved interface for wrong delivery detection device
Maintenance tools and toolbox
Main motor reversing device
Photoelectric safety protection device
Power outlet
Electric grease lubrication device
Touch screen (pre-break, pre-load)

Optional Configuration

Pneumatic mold pad device
Foot switch
Quick die change device (die lifter, die clamper
Or mold shifter)
Upper part punching device of slider
Feeder (air, mechanical and NC)
Leveling machine
Manipulator
Mold die lighting device
Rack
Thin oil lubrication device

Advantages

1

Slide guide

Advantage 1: The slide rail adopts “high frequency quenching” and “rail grinding process”:

High frequency quenching: the hardness reaches above hrc48,

Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.

Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.

2

Worm gear

Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)

Compared with the ball seat of nodular cast iron used by general factories

Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life

3

Ball socket

Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.

Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged

4

Copper sleeve

Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers

Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time

5

Thimble

Advantage 5: Sleeve ring, ring in contact with oil seal, ring “surface grinding” + “surface chromium plating (CR)” process

Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)

Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer

6

Crankshaft

Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel

Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.

7

Tubing

Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8

Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth

8
9
10

Gear & drive shaft

Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear


Product detail pictures:

High definition Kiston Press Machine - STX series C Frame Single Crank Mechanical Press – Daya detail pictures


Related Product Guide:

"Quality initially, Honesty as base, Sincere company and mutual profit" is our idea, in order to create repeatedly and pursue the excellence for High definition Kiston Press Machine - STX series C Frame Single Crank Mechanical Press – Daya , The product will supply to all over the world, such as: Japan, Jamaica, Malta, Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
  • This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Alma from belarus - 2018.09.16 11:31
    The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
    5 Stars By Ray from Liberia - 2018.12.14 15:26
    Write your message here and send it to us