Hot New Products 800t H Type Double Crank Press Machine - C Frame Servo Press (STA series) – Daya
Hot New Products 800t H Type Double Crank Press Machine - C Frame Servo Press (STA series) – Daya Detail:
Main performance characteristics one:
Adopt high-strength body structure, small deformation and high precision
The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency quenching” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life.
The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.
The copper sleeve is made of tin-phosphorus bronze ZQSn10-1, whose strength is 1.5 times higher than that of ordinary BC6 brass.
The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punch and die.
Standard Japanese SMC pressure regulating valve, lubricator, air filter.
Imported bearings and Japanese NOK seals are standard.
Standard Siemens touch screen
Optional mold cushion (air cushion).
Main performance characteristics two:
Built-in 9 processing modes, each product can select the most suitable processing curve for component processing,
So as to achieve high precision, high efficiency and high energy saving.
Compared with traditional punches, it has simple structure, high mechanical transmission efficiency and low maintenance cost.
According to the characteristics of the product/material, the punch forming speed can be reduced during material processing to achieve the best forming speed of the product/material. Thereby reducing vibration and stamping noise; improving product accuracy and prolonging the service life of molds.
According to different products, different heights are required, and the stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves efficiency.
Built-in 9 processing modes
Standard configuration
Technical parameter | ||||||||
Name | Specifications | STA-80sv | STA-110sv | STA-160sv | STA-200sv | STA-260sv | STA-315sv | |
Press capacity | Ton | 80 | 110 | 160 | 200 | 260 | 315 | |
Impulse position | mm | 3.5 | 4 | 4.5 | 5 | 5.5 | 6 | |
Slider stroke length | Swing mode | mm | 50/90/120 | 60/100/130 | 70/110/160 | 70/110/160 | 110/160/200 | 110/160/200 |
Full stroke | mm | 150 | 180 | 200 | 200 | 250 | 250 | |
Slider zero load(SPM) | Comesponding swing mode | S.P.M | 120/90/80 | 100/80/70 | 95/75/60 | 95/75/60 | 70/60/50 | 65/55/45 |
Full stroke comesponding swing | S.P.M | ~70 | ~60 | ~50 | ~50 | ~40 | ~40 | |
Max mold height | mm | 340 | 360 | 460 | 460 | 500 | 520 | |
Slider adjustment amount | mm | 80 | 80 | 100 | 110 | 120 | 120 | |
Up platform size | mm | 770*420*70 | 910*470*80 | 990*550*90 | 1130*630*90 | 1250*700*100 | 1300*750*100 | |
Down platform size | mm | 1000*550*90 | 1150*600*110 | 1250*800*140 | 1400*820*160 | 1500*840*180 | 1600*840*180 | |
Slider center to machine distance | mm | 280 | 305 | 405 | 415 | 430 | 430 | |
Servo motor torque | Nm | 3700 | 4500 | 7500 | 10000 | 15000 | 20000 | |
Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 | 6 | |
Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | |
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. |
Standard configuration
Hydraulic overload protection device |
Servo motor (adjustable speed) |
Digital mold height indicator |
Slider and mold balance device |
Electronic cam switch device |
Pre-cut counter |
Air source connector |
Two-degree fall protection device |
Air blowing device |
Independent control box |
Reserved interface for wrong delivery detection device |
Photoelectric safety protection device |
Oil-collecting silencer |
Electric grease lubrication device |
Touch screen (pre-break, pre-load, total count) |
Mold lighting device |
Optional Configuration
Pneumatic mold pad device |
Foot switch |
Quick die change device (die lifter, die clamper |
Or mold shifter) |
Upper part punching device of slider |
Feeder (air, mechanical and NC) |
Leveling machine |
Manipulator |
Mold die lighting device |
Rack |
Thin oil lubrication device |
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Hot New Products 800t H Type Double Crank Press Machine - C Frame Servo Press (STA series) – Daya , The product will supply to all over the world, such as: Tanzania, Mauritius, Sweden, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
By Michelle from Chile - 2018.06.05 13:10
Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
By Lulu from Montreal - 2018.09.12 17:18