OEM/ODM Supplier 800t Straight Single Point Press Machine - C Frame Servo Press (STA series) – Daya
OEM/ODM Supplier 800t Straight Single Point Press Machine - C Frame Servo Press (STA series) – Daya Detail:
Main performance characteristics one:
Adopt high-strength body structure, small deformation and high precision
The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency quenching” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life.
The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.
The copper sleeve is made of tin-phosphorus bronze ZQSn10-1, whose strength is 1.5 times higher than that of ordinary BC6 brass.
The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punch and die.
Standard Japanese SMC pressure regulating valve, lubricator, air filter.
Imported bearings and Japanese NOK seals are standard.
Standard Siemens touch screen
Optional mold cushion (air cushion).
Main performance characteristics two:
Built-in 9 processing modes, each product can select the most suitable processing curve for component processing,
So as to achieve high precision, high efficiency and high energy saving.
Compared with traditional punches, it has simple structure, high mechanical transmission efficiency and low maintenance cost.
According to the characteristics of the product/material, the punch forming speed can be reduced during material processing to achieve the best forming speed of the product/material. Thereby reducing vibration and stamping noise; improving product accuracy and prolonging the service life of molds.
According to different products, different heights are required, and the stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves efficiency.
Built-in 9 processing modes
Standard configuration
Technical parameter | ||||||||
Name | Specifications | STA-80sv | STA-110sv | STA-160sv | STA-200sv | STA-260sv | STA-315sv | |
Press capacity | Ton | 80 | 110 | 160 | 200 | 260 | 315 | |
Impulse position | mm | 3.5 | 4 | 4.5 | 5 | 5.5 | 6 | |
Slider stroke length | Swing mode | mm | 50/90/120 | 60/100/130 | 70/110/160 | 70/110/160 | 110/160/200 | 110/160/200 |
Full stroke | mm | 150 | 180 | 200 | 200 | 250 | 250 | |
Slider zero load(SPM) | Comesponding swing mode | S.P.M | 120/90/80 | 100/80/70 | 95/75/60 | 95/75/60 | 70/60/50 | 65/55/45 |
Full stroke comesponding swing | S.P.M | ~70 | ~60 | ~50 | ~50 | ~40 | ~40 | |
Max mold height | mm | 340 | 360 | 460 | 460 | 500 | 520 | |
Slider adjustment amount | mm | 80 | 80 | 100 | 110 | 120 | 120 | |
Up platform size | mm | 770*420*70 | 910*470*80 | 990*550*90 | 1130*630*90 | 1250*700*100 | 1300*750*100 | |
Down platform size | mm | 1000*550*90 | 1150*600*110 | 1250*800*140 | 1400*820*160 | 1500*840*180 | 1600*840*180 | |
Slider center to machine distance | mm | 280 | 305 | 405 | 415 | 430 | 430 | |
Servo motor torque | Nm | 3700 | 4500 | 7500 | 10000 | 15000 | 20000 | |
Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 | 6 | |
Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | |
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. |
Standard configuration
Hydraulic overload protection device |
Servo motor (adjustable speed) |
Digital mold height indicator |
Slider and mold balance device |
Electronic cam switch device |
Pre-cut counter |
Air source connector |
Two-degree fall protection device |
Air blowing device |
Independent control box |
Reserved interface for wrong delivery detection device |
Photoelectric safety protection device |
Oil-collecting silencer |
Electric grease lubrication device |
Touch screen (pre-break, pre-load, total count) |
Mold lighting device |
Optional Configuration
Pneumatic mold pad device |
Foot switch |
Quick die change device (die lifter, die clamper |
Or mold shifter) |
Upper part punching device of slider |
Feeder (air, mechanical and NC) |
Leveling machine |
Manipulator |
Mold die lighting device |
Rack |
Thin oil lubrication device |
Product detail pictures:
Related Product Guide:
Our personnel are generally in the spirit of "continuous improvement and excellence", and together with the outstanding top quality merchandise, favorable price tag and fantastic after-sales solutions, we try to gain every single customer's rely on for OEM/ODM Supplier 800t Straight Single Point Press Machine - C Frame Servo Press (STA series) – Daya , The product will supply to all over the world, such as: Nigeria, Istanbul, Slovenia, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, be sure to click the button to acquire additional nformation.
By Prima from Jamaica - 2017.07.28 15:46
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Ethan McPherson from Czech republic - 2018.05.22 12:13