Press machine

  • STC Series C type “Open Double Point Crank Precision Punch Press”

    STC Series C type “Open Double Point Crank Precision Punch Press”

    Main performance characteristics: The rigidity (deformation) of the body and slider is 1/6000. Use OMPI pneumatic dry clutch and brake. The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency hardening” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life. The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer...
  • ST Series C Frame Single Crank Mechanical Press

    ST Series C Frame Single Crank Mechanical Press

    Main performance characteristics: Body rigidity (deformation) 1/6000. Use OMPI pneumatic dry clutch and brake. The slider adopts two-corner six-sided guide path, and the slider guide adopts       ”high-frequency hardening” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life. The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life. The ...
  • STX series C Frame Single Crank Mechanical Press

    STX series C Frame Single Crank Mechanical Press

    Main performance characteristics: Body rigidity (deformation) 1/6000. Use pneumatic wet clutch brake, environmental protection, no pollution, low noise, long service life. The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency hardening” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life. The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times str...
  • Pull Down High Speed Press (HX series)

    Pull Down High Speed Press (HX series)

    Technical parameter Specifications Unit HX-25T Press capacity Ton 25T Stroke length mm 20 25 30 Strokes per minute S.P.M 100-700 100-650 100-600 Die height mm 185-215 183-213 180-210 Adjustment amount  mm 350*550 Platform size mm 400*550*80 Main motor HP 5 Press weight Ton 1.8 DAYA straight side double crank punch press VS Other straight side double crank presses Daya press Daya press: with platform and safety fence, convenient for clutch m...
  • Straight Side Ultra High Speed Press (EL series)

    Straight Side Ultra High Speed Press (EL series)

    Technical parameter         Specifications Unit ABSM EL-35T ABSM EL-50T ABSM EL-65T ABSM EL-85T Press capacity KN 350 500 650 850 Slider stroke length mm 10 16 20 25 30 40 10 16 25 20 30 40 10 20 30 40 50 10 20 30 40 50 Slider strokes per minute Spm 200-1800 200-1500 200-1300 200-1200 200-1100 200-1000 200-1800 200-1500 200-1200 200-1100 200-1000 200-900 200-1300 200-1100 200-1000 200-900 200-800 200-1200 200-1000 200-900 200-800 200-600 Die height mm 200-240 197-237 19...
  • Toggle Joint High Speed Press (Fast series)

    Toggle Joint High Speed Press (Fast series)

    Technical parameter Specifications Unit Fast-30T Fast-40T Fast-60T Fast-80T Press capacity KN 300 400 600 800 Slider stroke length mm 16 20 25 30 16 20 25 30 20 25 30 40 20 25 30 40 Slider strokes per minute Spm 180-1250 180-1200 180-1050 180-900 180-1250 180-1000 180-900 180-850 180-750 180-750 180-650 180-550 180-700 180-600 180-550 180-450 Die height mm 190-240mm 190-240mm 220-300mm 220-300mm Adjustment amount mm 50mm 50mm 80mm 80mm Slide area mm 600*300mm 750*340m...
  • Straight Side High Speed Press For Motor Stator And Rotor(HHD Series)

    Straight Side High Speed Press For Motor Stator And Rotor(HHD Series)

    Performance characteristics 1. The frame is made of high strength cast iron and high-precision integrated gantry structure, which prevents the opening problem of the fuselage under load, and realizes the processing of high-precision products; 2. Double axis center guide, four guide pillars guide the whole length, so even eccentric load can maintain excellent stamping accuracy and prolong the life of punch; 3. The forced lubrication and oil supply system of oil cooler are used to minimize the ...
  • Straight Side Five Circle Guide Column Press (HS series)

    Straight Side Five Circle Guide Column Press (HS series)

    Performance characteristics 1. The frame is made of high strength cast iron and high-precision integrated gantry structure, which prevents the opening problem of the fuselage under load, and realizes the processing of high-precision products; 2. Double axis center guide, four guide pillars guide the whole length, so even eccentric load can maintain excellent stamping accuracy and prolong the life of punch; 3. The forced lubrication and oil supply system of oil cooler are used to minimize the...
12 Next > >> Page 1 / 2