Rapid Delivery for 630t Mechanical Press Machine - STX series C Frame Single Crank Mechanical Press – Daya
Rapid Delivery for 630t Mechanical Press Machine - STX series C Frame Single Crank Mechanical Press – Daya Detail:
Main performance characteristics:
Body rigidity (deformation) 1/6000.
Use pneumatic wet clutch brake, environmental protection, no pollution, low noise, long service life.
The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency hardening” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life.
The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.
The copper sleeve is made of tin-phosphorus bronze ZQSn10-1, whose strength is 1.5 times higher than that of ordinary BC6 brass.
The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punch and die.
Standard Japanese SMC pressure regulating valve, lubricator, air filter.
Standard Japanese NSK bearings and Japanese NOK seals.
Standard configuration of German Siemens PLC, Siemens touch screen, Siemens motor,
Optional mold cushion (air cushion).
Standard configuration
Standard configuration
Hydraulic overload protection device |
Manual slider adjustment device (below ST60) |
Electric slider adjusting device (above ST80) |
Variable frequency variable speed motor (adjustable speed) |
Mechanical mold height indicator (below ST60) |
Digital mold height indicator (above ST80) |
Slider and mold balance device |
Rotating cam controller |
Crankshaft angle indicator |
Electromagnetic counter |
Air source connector |
Two-degree fall protection device |
Air blowing device |
Mechanical shockproof feet |
Reserved interface for wrong delivery detection device |
Maintenance tools and toolbox |
Main motor reversing device |
Photoelectric safety protection device |
Power outlet |
Electric grease lubrication device |
Touch screen (pre-break, pre-load) |
Optional Configuration
Pneumatic mold pad device |
Foot switch |
Quick die change device (die lifter, die clamper |
Or mold shifter) |
Upper part punching device of slider |
Feeder (air, mechanical and NC) |
Leveling machine |
Manipulator |
Mold die lighting device |
Rack |
Thin oil lubrication device |
Advantages
Slide guide
Advantage 1: The slide rail adopts “high frequency quenching” and “rail grinding process”:
High frequency quenching: the hardness reaches above hrc48,
Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.
Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.
Worm gear
Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)
Compared with the ball seat of nodular cast iron used by general factories
Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life
Ball socket
Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.
Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged
Copper sleeve
Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers
Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time
Thimble
Advantage 5: Sleeve ring, ring in contact with oil seal, ring “surface grinding” + “surface chromium plating (CR)” process
Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)
Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer
Crankshaft
Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel
Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.
Tubing
Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8
Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth
Gear & drive shaft
Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear
Product detail pictures:
Related Product Guide:
Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we've been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Rapid Delivery for 630t Mechanical Press Machine - STX series C Frame Single Crank Mechanical Press – Daya , The product will supply to all over the world, such as: America, Albania, Atlanta, Excellent quality comes from our adherence to every detail, and customer satisfaction comes from our sincere dedication. Relying on advanced technology and industry reputation of good cooperation, we try our best to provide more quality products and services to our customers, and all of us are willing to strengthen exchanges with domestic and foreign customers and sincere cooperation, to build a better future.
By Zoe from Bandung - 2018.08.12 12:27
Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
By Myrna from Zurich - 2018.11.22 12:28