Reasonable price for 800t Solid Frame Double Crank Mechanical Press Machine - C Frame High Speed Press – Daya
Reasonable price for 800t Solid Frame Double Crank Mechanical Press Machine - C Frame High Speed Press – Daya Detail:
Performance characteristics
1. The frame is made of high-strength cast iron. After internal stress relief, the material is stable and the precision remains unchanged, which is most suitable for continuous stamping production;
2. Double guide rail, one center pillar structure, using zero error ball bearing to replace the traditional sliding plate structure, so as to reduce the dynamic friction to the minimum, and cooperate with forced lubrication to minimize the thermal deformation and achieve the highest accuracy;
3. The reverse side dynamic balance device is optional to reduce vibration, so that the press has the best accuracy and stability;
4. Manual mold adjustment, with mold height display and oil pressure locking device, is convenient for mold adjustment operation;
5. Man machine interface microcomputer control, numerical fault monitoring system screen display, easy to operate;
Specification
Advantages
Slide guide
Advantage 1: The slide rail adopts “high frequency quenching” and “rail grinding process”:
High frequency quenching: the hardness reaches above hrc48,
Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.
Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.
Worm gear
Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)
Compared with the ball seat of nodular cast iron used by general factories
Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life
Ball socket
Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.
Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged
Copper sleeve
Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers
Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time
Thimble
Advantage 5: Sleeve ring, ring in contact with oil seal, ring “surface grinding” + “surface chromium plating (CR)” process
Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)
Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer
Crankshaft
Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel
Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.
Tubing
Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8
Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth
Gear & drive shaft
Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear
Product detail pictures:
Related Product Guide:
Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Reasonable price for 800t Solid Frame Double Crank Mechanical Press Machine - C Frame High Speed Press – Daya , The product will supply to all over the world, such as: Kuwait, Lebanon, Benin, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.
By Roland Jacka from Cyprus - 2018.10.31 10:02
We have been looking for a professional and responsible supplier, and now we find it.
By Ann from Denver - 2017.04.08 14:55